Can't identify these power diodes
Can't identify these power diodes
I'm attempting to repair a MAC (garage) battery charger/booster, 12/24v, 50/25A and 325/470A boost.
Some of the diodes are short circuit, the markings on them are: T2K12-6 and T2D06-4
There are 8 diodes in two blocks of 4 feeding the positive output of the charger.
I can't find, so far, any spec for these diodes.
Some of the diodes are short circuit, the markings on them are: T2K12-6 and T2D06-4
There are 8 diodes in two blocks of 4 feeding the positive output of the charger.
I can't find, so far, any spec for these diodes.
-
piratepaul
- Posts: 432
- Joined: Mon May 20, 2013 2:45 pm
Re: Can't identify these power diodes
Just replace with any diodes that can handle the current... ebay.
Tar&stuff.
Tar&stuff.
-
piratepaul
- Posts: 432
- Joined: Mon May 20, 2013 2:45 pm
Re: Can't identify these power diodes
Any blocking diodes that is not Zener.
Tar&stuff.
Tar&stuff.
Re: Can't identify these power diodes
Thanks, although choosing the right spec is rather daunting in view of the high boost amps. The MAC charger has a 120 amp re-settable trip on the +ve output but it seems this was always tripping so they bridged it out which probably caused the demise of the diodes.
-
piratepaul
- Posts: 432
- Joined: Mon May 20, 2013 2:45 pm
Re: Can't identify these power diodes
I should think they are rectifier bridges and there will be an output to earth ...chassis.
One bridge is for charge and the other for boost... I could be wrong but that kind of makes sense.
Tar&stuff.
One bridge is for charge and the other for boost... I could be wrong but that kind of makes sense.
Tar&stuff.