I have a small hot foil press which requires a new controller, it's 240v heating a 400w cartridge heater via a type k thermocouple.
I hate throwing anything away so want to reuse and recycle where I can. The foil press is used for hot foil embossing of one off leather items. The controller I want to use is as per the image attached, iam unsure what the component shown on point's 1, 3 & 4 is dose the fact that the component is shown within the ring of contacts mean it's built in to the controller? Any assistance would be greatly appreciated
Richard @ Brockbags_uniquebags (instagram)
The diagram on the label is a pinout for the plug on the base, along with a schematic of the control actions of the timer's switch and power inputs.
It looks like a replacement might be available here:
https://www.tempatron.co.uk/product.php ... imers.html
An exact replacement isn't listed but it's likely your part number was superceded, a call to the company could help.
Not sure I would be comfortable bodging that. The resulting conflagration might not be covered by insurance
Recreational broadcasting for everyone