Rgb led driver error

Help & Feedback for Electronics Assistant Software.
Post here if you need help, want to report a bug or have comments or suggestions for future releases.
Post Reply
SinghLED
Posts: 1
Joined: Mon Apr 14, 2014 7:20 pm

Rgb led driver error

Post by SinghLED » Mon Apr 14, 2014 7:28 pm

Hi people I'm wondering if I could get some help. using pwm method with Arduino i am getting a dim light when it should be completely off the code is correct but i think it maybe the circuit. I have built an rgb led driver using an LM317 connecting the Vout and adj via a resistor that then goes to the positive connection of the high power LED than it passes to a MOSFET the stp14nf10 The leg controlling the pwm is connected to the led.

I appreciate any reply thanks

DanKruger
Posts: 1
Joined: Fri Sep 12, 2014 6:41 am
Location: Belarus
Contact:

Re: Rgb led driver error

Post by DanKruger » Fri Sep 12, 2014 7:35 am

Hi there, singh, I was about to write the same question when I saw your post. I've got a position of an electronics enclosure design at an electronics development company and I faced the situation when using pwm for Arduino I get a dim light while, to my understanding, there shouldn't be any.
Waiting for any suggestion. If I find anything on the Net I'll post it here.

Post Reply